| |
|
|
| 1 |
Please
Install RemoteView from the Setup CD |
 |
| |
or You
can go to our website Download section, download the correct
version of RemoteView Setup program. |
 |
| 2 |
Running
Setup program, you just need to follow the step by step.
Go Next
until Finish. It should be done. |
 |
| 3 |
You
should find the RemoteView software from
Start
-> Program -> Multicam -> RemoteView |
 |
| |
|
|
| |
How
to use? |
| |
RemoteView
design for Supervisor watching purpose.
Please Notice this. RemoteView only allow 1 user to access at
time.
If you are using WinXPsp1 and cannot see any video picture,
please go to our download page to download Patch program.
On the Main System site, please make sure Enable TCP Server
(for the RemoteView).
if you are using 56k Modem to direct connect, please make sure
Enable Modem Server |
| 1 |
After
running RemoteView software, you should see this picture.
Click
Connect button,
Select Internet TCP/IP
if you
are using 56k modem to direct connect, please select Dial
modem instead.
please make sure main dvr system has modem also. |
 |
| 2 |
please
type your main system IP address.
And, your
ID & password.
Click
Login. That should be done. |
 |
| |
|
|
