GView comparability test form

#1 GView can install into the PDA, but can’t find the GView program.
#2 Please give user the SmartPhone beta program for testing.

Note:
1. GView install only support the Intel StrongARM CPU and the Intel XScale PXA Series CPU.
2. GView program is only able to run in WinCE3.0 and PocketPC 2002/2003.

Why does GView unable to see the camera name?

Ans: There are three reasons that will cause the camera name is unable to be viewed.

1. Version 5.3 GView connect to version 5.21/6.0 server.
2. Version 6.0 GView connect to version 5.21 server.
3. Port 4550/5550 are closed.

Note: It will take about 20 to 30 seconds when version 5.3 GView connect to Version 6.0 server.

G-View comparability test form for Webserver

How to use PDA GView?

Server Setup Steps:
Step1. Check the [Create JPEG/GIF file] column in your netZeye-System's WebCam Server Setup.

Step2. Press the [Server Setup] button. Then input the IP address (Domain name) in the [Assign GateWay IP Address] column.

PDA Connect Steps:
Step1. Click the [GView] icon in your PDA to start GView application.

Step2. Click the [Connect] button located at the lower left corner of the screen.

Step3. Input the IP address of the netZeye-System you wish to connect to in the [IP Address] column, enter a valid user¡¦s ID and password then click [OK].

Step4. If login successfully, you will be able to see the video coming to your PDA.