| How
to Enable Firewall for netZeye system (WindowsXP Only)? |
| 1. |
Unplug
Network Cable first.
(from the back of your computer)
|
|
| 2. |
Shutdown Your PC for 30sec, then
Turn On your PC with
No network cable connect.
|
|
| 3. |
Go to Start Menu, and open Control
Panel.
If you are using classic start menu, go
Start -> Settings -> Control Panel
Double click icon on Network
Connections |
 |
| 4. |
You should see this icon, if you have
a network card.
If you don't have network card, you don't need to see this page at
all. |
 |
| 5. |
Right Click and choose Properties
(left click) |
 |
| 6. |
You should see properties page on
the right.
Click Advanced
Tab |
 |
| 7. |
Check square
box , Protect...... |
 |
| 8. |
This instruction (8~19)
is for netZeye system
Firewall Port# opening:
Please follow these steps:
Click Settings at
the bottom |
 |
| 9. |
click Web Server (HTTP) to highlight
the line.
Choose Edit at the
bottom
|
 |
| 10. |
Then, it should popup this picture.
Remember:
Write down the second line information on the paper,
this is your computer name.
or please do Ctrl+C to copy the info.
You need this information later.....
Click Ok to exit |
 |
| 11. |
Now, we have more services need
to add.
RemoteView,
Web1,
Web2...
Click Add |
 |
| 12 |
After Click add button, you should
see this picture.
Type RemoteView
in the first line
Type your computer name in the second
line. (see 10)
or use Ctrl+V to paste it back. (see 10)
Type 3550
in the 3rd line.
Type 3550 in the 4th line.
Click OK
when finish. |
 |
| 13 |
Same thing, Click Add button.
After Click add button, you should
see this picture.
Type Web1
in the first line
Type your computer name in the second
line. (see 10)
Type 4550
in the 3rd line.
Type 4550 in the 4th line.
Click OK
when finish. |
|
| 14 |
Same thing, Click Add button.
After Click add button, you should
see this picture.
Type Web2
in the first line
Type your computer name in the second
line. (see 10)
Type 5550
in the 3rd line.
Type 5550 in the 4th line.
Click OK
when finish. |
 |
| 15 |
Now, it is completed your settings.
Click OK when finish.
If you need to use other services,
or other servers. You need to add in here, too.
For example,
Web Server use port
80
Webcam1 use port 4550.
Webcam2 use port 5550.
WebcamAudio use port 6550
RemoteView Server use port 3550.
RPB server using
port 5066.
Connect to Center
use port 20001
VNC use port
5900 |
 |
| 16 |
Click OK
to finish Enable Firewall. |
 |
| 17 |
When Firewall is enabled, you should
see a little orange color Lock Icon on the top
right corner. |
 |
| 18. |
Plug-in back your Network
Cable |
|
| 19. |
Reboot PC.
|
|
| |
|
|
