Welcome to netZeye .com -- DLink 604

DLink Router (DI-604) Configuration for netZeye System
In this chapter, we are doing the IP forwarding.
First, you need to know your Local IP address first. If you don't know everything, we suggest read How to find Local IP and What is WAN IP first.

IP forwarding: Don't try to think too hard. Just picture in your mind, (IP address = your telephone number)
You use phone to call from outside to your office. Your office telephone system will pickup and Redirect the phone call to your extension telephone.
That is call forwarding. Ip forwarding is using the same theory to redirect Internet connection.
What we need to do is, we need to setup your Router to do automatic redirection. So, prepair to work now....

*Setup Internet IP*

Open Internet Explorer
type Address:

192.168.0.1

After Successful login, you should see main menu.

by default the password will be
ID: admin
pw: (no password)

This is Main Menu,

To setup your Internet Access, please go WAN

Setup your Internet Access
in Here.

(Remember, we only recommend to use Static IP Address.)

What is the differance between Static and Dynamic?

For example,
Just imaging the TCP/IP like a tele-phone number in our world.
If you want dial a phone to someone, you need to know their number first. Right?

If your are using static IP address, then the number will not change in the Internet world.
Means, you can remember your IP easy and easy to access from anywhere.

What happen if you have Dynamic IP? Then, you need to findout and tell someone about your current IP Address first. Then, someone can access that number to reach remotely. It is more difficulty to access with remote watching program.

*IP Forwarding*

Go Advanced Tab on the top.

IP Forwarding Section...
(Virtual Server = IP Forwarding)

click Virtual Server

Notice: )
Plese follow these steps.

1. Select Virtual Server HTTP (for example)

2. Click Enable

3. Change Prive IP to your local IP address.

If you don't know your local computer IP address,
please check knowledge base
How to find your Local IP (click here)

4. Click Apply.

How to Add a new setting?
Just Clean all the setting in the input box.

1. Change the Name

for example,
type RemoteView

2. Change Private IP:
change to your Local ip position.
192.168.1.100 just an example.
you should type 192.168.0.###

NOTICE:)
192.168.1.101 it is my sample IP address. You "must" change to your computer IP address. Don't follow the picture and just copy it.

If you don't know your local computer IP address,
please check knowledge base
How to find your Local IP (click here)

3. change Prive Port & Public Port #

Name	Private to Public
RemoteView	3550 to 3550
WebCam	80 to 80
WebCam1	4550 to 4550
WebCam2	5550 to 5550
WebCamAudio	6550 to 6550
RPB	5066 to 5066
Center	20001 to 20001

Look! Port 80 already in the list, you just need to make sure it is enable.

Add these setting into Virtual Server.... (Note: You only add your need)

4. Click Apply to add.

Make sure Firewall is
allow to ping from outside.

Check Status

If your WAN is showing no IP address, then you are not connect to Internet.

Make sure you have IP address in there.

Troubleshooing

If you successful forward your IP, but still see Pange cannot be found from your RemotePC.

1. Check your Main System (the DVR), make sure the WebCam Server is turn ON.

2. If your Webcam Server is turn ON, but still cannot show. Possible your ISP is blocking the port 80, not allow customer to share. You need to change port 80 to 2550 instead.

Step 1. go back to Step 6 in this page. Change/Add Webcam number: 2500 to 2550. And Apply

Step 2. go to your Main System, got Network button.
Disable Webcam Server and ReEnable it again.

Step 3. Look top right, change from Port 80 to 2550 instead.

I can see my Webcam page, but Video keeps saying No video, or just show Black.

Possible Your Main DVR system Webcam Server setting is not correct.

Step 1. go to your Main System (the DVR), click Network Button.
Disable Webcam and ReEnable again.

Step 2. go Server Setup button, double check your Video GateWay IP, it should be equal to your WAN IP Address

Top