|
|
|
|
| Home | netZeye | Exhibitions | Knowledge Base | Support | Contact Us | Links | Live Views | Download |
QS2000 Installation network version
| 0. | Copy the entire contents of the original Qs2000
CD to QSELL folder under d: d:\qsell |
Use Qsell to seperate from QS2000 later on. Do it both the Server and POS cashier |
| Server Installation | Do the Server first before satellite POS cashiers | |
| 1. | click [My computer] icon to display all the devices under [My computer] | We wish to map the C: drive of server |
| 2. |
Right-click the C: drive |
Check [Shared as] check [full] click [OK] to continue Now the Server C: drive is shared and can be seen by all the satellite POS cashiers Now goto the POS cashier to establish the connection between the POS cashier and the Server C: drive |
| POS Cashier installation | ||
| 1. |
After boot your POS cashier, password menu appears
|
User name=POS1 Password=none |
| 2. |
On the POS cashier PC, Double-click the [Network Neighborhood]
|
We saw the Serve and other POS stations connected to the network Double-click the Server |
| 3. |
The C: drive of the Server appears
|
We will re-name it to F: drive for all the other POS cashier Right-click on the C: |
| 4. |
This appears
|
We will map the Server C: drive as F: |
| 5. |  |
Now map it as F: Check [Reconnect at logon] We complete the network mapping procedure. Let's install the QS2000 software to the Server |
| . | Install QS2000 to Server | |
| 1. | Insert QS2000 CD and it will auto-run | move the mouse and wait 0 sec to activate the CDROM |
| 2. |  |
Install QS2000 to its default folder Keep accepting default until you encounter type of Setup menu |
| 3. |  |
Choose "Network-Back office" click [Next] to proceed |
| 4. |  |
enter register number=1 for Server 2=POS1 3=POS2 etc click [next] to continue
|
| 5. |  |
Continue the installation and the Server will re-boot. Ignore "there are users connect to the network" message and just go ahead to re-boot.
After re-boot Create [QS2000 Manager] icon on the desktop of the server |
| 6. |  |
First the first time ID number=1 Password=password click [OK] to proceed. |
| POS Cashier QS2000 Software Installation | ||
| 1. | On the POS cashier Goto D:\Qsell\QS2000 |
Type Setup.exe Follow the same procedure as Server until |
| 2. |  |
For POS cashier choose [Network - POS] click [next] to continue |
| 3. |  |
POS1=2 POS2=3 etc click [next] to proceed. |
| 4. |  |
Under [Network environment] we have to change C: drive to F: which is the mapped drvie of Server. (all the data is coming from the mapped drive F:) If mapped drive is Z, then change C: to Z: click [Next] to continue |
| 5. |  |
now we change to F: Click [next] to proceed. |
| 6. |  |
Keep default folder and setting and proceed. POS cashier will re-boot Make a shortcut for the QS2000 POS |
| 7. |  |
Done (rename Qs2000Training CD) Goto test the POS cashier double-click [Qs2000 POS] icon |
| 8. |  |
Every POS cashier ID & password is the same initially. ID=1 Once you get this far, you are connecting to the server fine. |
