This is the Authorizer Software

Please install it, after you run it. You should see this picture.

Click Setup button

To making software fully work, you need to regist you software to Authorizer company.
Or, you can choose Demo to try it.

Please fill up all informations

Make sure all ID is correct.

Click Payment Types

Choose the one you are use

Select Merchant Information

Please input your information here.

*NOTE)
PLEASE FILL ALL INFO WITH CAPITAL Letter.

Dot or _ or Symbol Char is NOT ALLOWed.

Make sure Location code is correct.

If you use Soft 56K modem COM3, install driver in the windows first.

In the Windows Modem Setup should show up.

but You don't want to use that, please select
Manual Modem Setup

Choose Other

and, Select correct COM port

Click Purchase,
type Receipt #, Amount, Card #, Exp#

Exp# is M+Y, for ex, 0305 = 03 2005
no space

Click Process, then it will Dial

If you got Approval message. Congratulation, it works.

If you got Re Enter message, please check your Setup information. Something is not matching in your Setup. Your Authorizer got connect but it bounce back with incorrect input.

If you cannot hear Dial or pickup tone, please check your Modem setting.

Authorizer Engineer recommend use US Robotic Modem

Remeber, Authorizer only take Card Reader Track 2 only

If you have reader not no track2, please use Notepad to reprogram it.

Please Input Field like this on each POS.

if it is standalone, your path is
c:\atomic

if your system is POS, and you have server. your path should be
f:\atomic    f:\ is your map drive.

Remeber, "each" POS system need to setup QSdoctor like this.

Save & Edit QS2000 Doctor

Select Database & choose
Tender Type

For example, select

MasterCard / Visa

choose Edit