 |
 |
 |
| Home | netZeye | Exhibitions | Knowledge Base | Support | Contact Us | Links | Live Views | Download |
click Here to go back to LiveView page...
How to pan-tilt-zoom
| 1. |
If you're in netZeye.com, you can click the demo button to enter
the remote-viewing program to control the pan-tilt-zoom camera. If you are using your own netZeye system, then please enter the remote-viewing program by typing in the IP address as described in the manual. |
 |
| 2. | choose Mpeg4 and click [submit] to continue. |
 |
| 3. |
Click [DSL/Cable/T-1] or [Modem] is you're using modem to get online. In this example, we choose DSL. Click [submit] to continue |
 |
| 4. | Choose [camera-4] which is the pan-tilt-zoom camera |
 |
| 5. | Click [play] to start |
 |
| 6. | Click [Active] on the top-right frame to continue |
 |
| 7. |
Now all the control icons are available. Please give it a few moment to response. The commands need to travel over 40 hubs from your PC to TSM's pan-tilt-zoom camera. Click [Reset] to set the camera back to initial stage. |
 |
click Here to go back to LiveView page...